Desiccant Flex Dryer DFD

The dryer has a very small footprint and can dry several hygroscopic plastics raw materials simultaneously

Central desiccant dryer for continuous drying of granular plastic materials to a final moisture content of 0.02% or lower.

The DFD dryer has been designed for drying hygroscopic raw materials, non-hygroscopic raw materials, and regrinds in the temperature range of 60-200°C.

The DFD can be connected to a number of Drying Hoppers (DH) ranging in size from DH 15 to DH 600. The DH can either be placed on the processing machines or be centrally located in an assembly on a frame with the DFD dryer. Dew point down to ÷40°C or better.

DFD 100-200 comes with a microprocessor control type Lab-Dry, with a touch panel in color.

DFD 300-8500 series generates dry air by use of energy-efficient ventilators, saving up to 60% on the power bill, compared to conventional units. DFD 300-450 is furthermore fitted with a frequency inverter as standard.

DFD 300-8500
The DFD 300-8500 dryer can supply dry air with a dew point down to ÷40ºC or lower, to one or more insulated Drying Hoppers (DH hoppers) according to requirement.

The DFD dryer has been designed for drying hygroscopic raw materials, non-hygroscopic raw materials, and regrinds in the temperature range from 60-200ºC.

Microprocessor control type Lab-Dry, with touch-panel in color
or
PLC - Processor Control Siemens 1200, Control panel KP300.

Comprehensive 3-year warranty, excl. wear parts.

Can be combined with Labotek's Energy Efficient Solutions:    |  Gravi-Dryer  |  EHR  |  EAC  |  

Read also    |  DDM  |  DDM 30-G